Search found 12 matches

Absolutely awesome. May I dare ask the price you get for one of these?

I put a timney trigger in my new remington r25 .243 and I love it also. I only have about 100 rounds thru the rifle and am still developing loads for it. I got the 58 v-max figured out, now I'm wor ...

Has anyone tried this new powder? I am currently trying it in a .243 remington r25 with 58 v-max. I couldn't find any loading data for this powder (imr 8208 xbr) with .243. I started out with 38.0 ...

I just purchased a r25 in .243 and am in the process of developing loads. My friend has the same rifle and his loves 42 grains of imr 4064 with the 58 v-max naked (non moly), can cover 3 shots at 150 ...

What was you using for optics, and were you using only a red light? I'm considering going out at night, as it is legal to do so where I live.

I was wondering if any of you bench guys would happen to know which particular .224 52 grain bullet has the longest bearing surface. I have some speer HP (1035) that seem pretty long. Does anyone kn ...

I have an ar15 with a 1 in 9 twist. I loaded up with TUBB final finish bullets and it made my group size shrink from 2 inch at 100yrds to dime size afterwards. I guess my barrel needed broke in, and ...

My ar likes 60gr v-max with 25gr benchmark, cci br primer, out of it's 16 inch 1-9 twist. The barrel was also lapped with TUBB final finish bullets.

I have a Nikon 6.5x20x44 on my .22-250 and love it. But the price is high. I also have numerous leupolds on other rifles ranging from vx1 to vx3. I have to tell you that the leupold is very clear a ...

BadLand, I also have a rem. varmint laminated. It is a heavy barrel. I just finished working up loads with it. I use 39.5 grains of 4007ssc with 55 nosler ballistic tips. 3704 fps. Worst group i ...

In my browning rifle, the bullet is just seated into the neck area, it just goes in until it meets the shoulder. The rifling is far, and to seat the bullet .007 from the rifling the bullet isn't in t ...

I have a browning a-bolt in .22-250 with the boss. The barrel is 22 inches. I hand loaded David Tubb's final finish bore bullets (80 grainers) to polish the bore. After that, I slowly worked up a l ...